Insists on improving quality of products as well as core competence of itself, FORESTAR has kept investment on R &D since it created.

■ On 2008, FORESTAR created Research Center together with Chemical Industry Institute of Anhui University.
■ On 2010, FORESTAR started the ‘ Green Hope Plan’ with Chemical Industry Institute of Anhui University, getting the agreement of accepting 2 graduator with master degree of polymer chemistry as trainee.
■ On 2011, FORESTAR get agreement with East China University of Science and Technology to build the laboratory of ‘ Green Building Material’ in the university.
  • Click to view large
    Application: simulates damaging effects of long term outdoor exposure of materials and coatings by exposing test samples to varying conditions of the most aggressive components of weathering - ultraviolet radiation, moisture and heat.
    Features :
    1. Ultraviolet light causes almost all the photo degradation to materials exposed outdoors. The QUV tester reproduces only the UV portion of the spectrum. Our UVA-340 lamp is the best available simulation of short-wave sunlight. It is especially useful for comparing the performance of different types of polymers and stabilizers. It is the best lamp for correlation studies.
    2. Products outdoors can be exposed to moisture, in the form of dew, for up to 15hours per day. All models of QUV provide a rigorous, yet highly realistic, moisture exposure with cycles of hot condensing humidity. A QUV/spray can simulate the effects of rain, such as thermal shock and erosion.
  • Click to view large Item NO:ZBC1251-2
    Application: The ZBC series Pendulum Impact Testing Machine for plastics is mainly designed to perform special tests for plastic material to determine impact resistance performance under dynamic loading.
    Features:
    1.Fast and simple to change impact energy only by changing pendulum arms.
    2.Reduced friction bearing shaft assembly and solid vibration-free base.
    3.Interchangeable anvils ensure constant striker center
    4.Be capable of determining the impact resistance of nonmetallic materials using either a Charpy or Izod configuration.
    5.The instrument is controlled manually and semi-automatically and easy to operate.
    6.The test results can be obtained automatically after finishing test. Its excellence and advantage will be shown apparently in continuous impacting tests lab and abundant impacting tests manufacturers. Digital monitor allows test result through a pin-type printer.
    7.Complies with ISO179, ISO180, ASTM D256, ASTM, D4812, ASTM D4508, ASTM D950 and other similar standards.
  • Click to view large
    Universal Material Testing Machine
    Item NO:CMT5504
    Application: Widely used in testing tensile strength, compressive strength, flexural/bend strength, coefficient of friction, creep & stress relaxation, as well as adhesive strength of materials.
    Features:
    Equipped with the computer & Software & printer, it can control the test procedures as the set programs, and can also display record, process and print the test results and can draw test curves automatically in real time.
    1.Windows based & user friendly
    2.Programming of Rate of Loading.
    3.Safety features for overload and over travel
    4.Saving & Retrieving of Test Files
    5.On line display of Load & Displacement
    6.Storing of Data in Numeric form
    7.Computer controlled electromechanical drive
    8.Wide range of Tensile Speeds
    9.Personal Computer for enhanced performance and flexibility
    10.User defined programs and high level data processing programs
    11.Graphic Display, printer/plotter for high accuracy and rapid response
  • Click to view large Melt Flow Rate
    Item NO:2RZ1452
    Application: to test the melt flow rate of macromolecular materials.
    Features:
    1.Provide test parameter control, self-diagnostics and digital calibration.
    2.On board computer controls, easy to clean and more effective
  • Click to view large Rockwell Hardness Tester
    Item:TH320
    Application: to test the Rockwell hardness of materials Features:
    1.TH 320 Rockwell Hardness Tester applies the ROCKWELL testing method and can transfer hardness to HB,HV,HLD,HK and ob. It is widely used to test the material hardness of steel, cast iron, non-ferrous metal and plastics. It has the features of high precision, wide testing range, high definition LCD, automatic print and link to computers. Can be used in the testing, research and production of metrology, mechanical manufacturing, metallurgy, chemicals, and building materials, etc.
    2.It has a special protrudent nose design, and capable of testing on surfaces difficult to reach, for example, internal surface of ring pars and round parts.